PS 73 BW Sheets with paper backing for Paint, Varnish, Filler, Plastic

Applications
Paint
Varnish
Filler
Plastic
Properties
Bonding agent Resin
Grain Aluminium oxide
Coating Semi-open
Backing B-paper

The Klingspor abrasive sheets PS 73 BW – an effective abrasive with a long service life

The abrasive sheets PS 73 BW by Klingspor are a good option for processing all kinds of coated surfaces. They can be used for sanding paint, filler, varnish, and plastic. These abrasive sheets are characterised by their

  • high removal rate,
  • reduced clogging and
  • long service life.

Also available in ultra fine grits, they are even an ideal choice for fine sanding applications.

Minimal clogging thanks to the semi-open coating on a paper backing (B-paper)

Klingspor furnishes their abrasive sheets PS 73 BW with a paper backing (B-paper). Paper backings are grouped into classes A though G based on their mass per unit area. A-papers are the lightest, while G-papers are the heaviest. Consequently, the backing used for the abrasive sheets PS 73 BW is rather light. The abrasive grain coating covers between 70 % and 80 % of the surface. Referred to as semi-open, this type of coating leaves a number of spaces between the abrasive grains, allowing for an effective discharge of abrasive dust, chips and other debris. Despite its high removal rate, the PS 73 BW has a minimal tendency to clog during sanding on varnish, filler, paint and plastic. This allows for expedient work without any interruptions.

Extraordinary service life thanks to added active agent coating

This abrasive by Klingspor comes with a top coating made of synthetic resin that complements the base coat. This coat firmly secures the abrasive grain in the base coat and supports the grain against lateral forces at the same time. Solid and distinguished by strong adhesive force, synthetic resin always delivers the same consistent qualities thanks to its synthetic manufacturing process. It also provides for a long service life. The service life of the abrasive sheets PS 73 BW is further enhanced by an added coat with active agents. The PS 73 BW abrasive by Klingspor performs exceedingly well and for a long period when used for smoothing filled surfaces, the processing of plastics and the sanding of varnished and painted surfaces.

Reset filters
Width in mm Length in mm Grit Cat.number Availability
230
Width
280
Length
180
Grit
301197
Cat.number
Availability
230
Width
280
Length
240
Grit
301199
Cat.number
Availability
230
Width
280
Length
320
Grit
301201
Cat.number
Availability
230
Width
280
Length
400
Grit
301202
Cat.number
Availability
Dealer search
Do you want to buy offline or receive advice before you buy? Our dealer search function will show you your nearest Klingspor dealer.